Zu Inhalt springen
What's in the Box?

What's in the Box?

The Deepcool PX1200G is manufactured by Channel Well Technology (CWT) and is a 80+ Gold unit delivering 1200W of pure power. It is ATX 3.0 certifies hence delivers 60% efficiency even at as low as 10W or 2% of the total wattage so no matter if you buy the 1200W model or the lower wattage variants like the 1000W or 850W lower load efficiency is guaranteed due to its ATX 3.0 certification.

The unit has compact dimensions, and the fan grille is not restricted, allowing for high airflow. On the front side, square ones are used instead of the typical honeycomb-style perforations. On the same side, besides the colored power switch, we also find a button for toggling on/off the PSU’s semi-passive mode.
Two EPS connectors on dedicated cables, three PCIe 6+2 pin on the same amount of cables, a single 12VHPWR set at 600W, eight SATA, and four 4-pin Molex connectors. Usually, 1200W PSUs have more than ten SATA connectors, but I find this extreme since most use NVMe drives nowadays, so eight SATA will be enough. The amount of 4-pin Molex connectors is adequate, and the distance between all peripheral connectors is ideal at 150mm.